Adjusting The Sound; Surround (Sur) Parameters - Sony TA-VE810G Mode D'emploi

Front Panel Operations

Adjusting the Sound

The adjusted sounds are stored automatically.
To select the sound fields
For the on-screen operations, see page 25.
Press GENRE repeatedly to display the sound fields
genres, then press MODE repeatedly to display the
sound fields mode. For the list of sound fields, see
page 24.
To turn off the sound fields
Press SOUND FIELD ON/OFF.
To adjust the tone parameters
For the on-screen operations, see page 26.
1
Start playing a component, then select the sound
field you want to adjust.
2
Press DPC MODE repeatedly until the TONE
indicator lights up.
3
Use digital processing control buttons (
select BASS or TREBLE.
Bass adjustment
Initial setting is : 0 dB
Treble adjustment
Initial setting is : 0 dB
4
Use digital processing control buttons ( / ) to
adjust the tone level. You can adjust the level ± 10
dB in 2 dB steps.
5
Repeat steps 3 and 4 to make all necessary
adjustments.
z
To turn off the equalizer or tone adjustments
without erasing them
Press DIRECT PASS.
GB
40
To adjust the surround sound parameters
For the on-screen operations, see page 27.
1
Start playing a component, then select the sound
field you want to adjust.
2
Press DPC MODE repeatedly until the SUR
indicator lights up.
3
Use digital processing control buttons (
select the parameter you want.
See "Surround (SUR) parameters" below for
details.
4
Use digital processing control buttons ( / ) to
adjust the level of the parameter.
Note
Certain menu items may not be available for adjustment
depending on the current settings and menu modes.
Unavailable items appear dimmed when shown in the
display.

Surround (SUR) parameters

Surround effect level
It lets you adjust the "presence" of the current surround
/ ) to effect.
Delay time (Dolby Surround mode only)
Initial setting is : DELAY 20
It lets you adjust the delay time of the Dolby Pro Logic
surround sound.
See page 27 for details.
Rear speaker level
Initial setting is : REAR SP 0 dB
Lets you adjust level of the rear speakers.
See page 19 or 27 for details.
Centre speaker level
Initial setting is : CENT.SP 0 dB
Lets you adjust the level of the centre speaker.
See page 19 or 27 for details.
/ ) to