Bosch Appareil de réglage pour capteur ACC Instructions D'installation Et D'utilisation page 18

3. General information
3.1 Application
The setting device is used for the testing and adjustment in the
workshop of ACC sensors (Adaptive Cruise Control - based on
proximity to other traffic) installed in the vehicle.
3.2 Scope of delivery
The setting device consists of the following components:
- Setting device
- Wheel laser (with batteries)
- Slotted cover
- Coarse setting device (with batteries)
- Universal quick-change clamp
- Alignment angle (for rail)
3.2.1 Condition
- Rail 1 682 319 031
3.3 Tools
- Torx screwdriver (T 20)
- Tape measure
3
Figure 1: View of test stand:
1. Coarse setting device
2. Rail (not in scope of delivery)
3. Mirror
18
1
2
4
4. Description of device
Figure 1 illustrates the components of the setting device. The
individual components have been assigned a number, explained
in the key below the diagram.
The sections which follow contain separate descriptions of the
components, how they function and their controls.
6
5
4. Slotted cover
5. Wheel laser
6. Universal quick-change clamp