Publicité
Les langues disponibles
Les langues disponibles
the original position.
Remove the water tank from the device,
empty it and clean it thoroughly. Pump (A)
should also be cleaned once a month or
when
very
dirty
malfunction. Remove both screws on the
pump and twist away the catch (B); now
you can remove the pump. Remove the
filter from the pump (side) and clean the
filter and the space behind it. Refit all the
parts in the original position (C). Beware:
If the pump is not correctly fitted, it could start to vibrate!
At the end of the season, store the cleaned and dried heater in the original
packaging if possible. Store it upright in a cool, dry and dust-free place.
Never let water sit in the water tank or casing for longer than a few days.
rinse the tank and let the aircooler dry if you are not planning to use it for a
CE - DECLARATION
Euromac bv., Genemuiden-NL hereby declares that the electrical air cooler,
brand EUROM, type CoolStar comply with the LVD guideline 2006/95/EC and the
EMC guideline 2004/108/EEC and meet the following standards:
EN60335-2-98：2003+A1+A2
EN60335-1:2012
EN 60335-2-80 :2003+A1+A2
EN 62233:2008
Genemuiden, 26-01-2016
W.J. Bakker, alg.dir.
or
in
case
of
Change it/throw it away;
while.
18
a
EN 55014-1:2006+A1+A2
EN 55014-2:1997+A1+A2
EN61000-3-2:2006+A1+A2
EN61000-3-3 :2013
Publicité
