Stop Time - Thermador M271E Série Guide D'utilisation Et D'entretien

Stop Time

18
Note:
• You cannot use Cook Time if a probe (some models) is being used.
• The maximum Cook Time setting allowed in 12-hour display mode is 11:59
hours or 23:59 hours in 24-hour display mode. See "User Settings" for chang-
ing the display mode.
Use Stop Time to delay the start of a Cook Time. Enter the time that you want the
mode to end. The oven calculates the proper start time. It starts and stops auto-
matically.
m
Caution:
To maintain food safety, do not leave food in the oven for more than
one hour before or after cooking.
To set the Stop Time:
1. Set a Cook Time first.
2. Press STOP TIME.
The oven mode, temperature and the stop time symbol are displayed:
Roast
Set stop time
3. Enter the stop time, for instance, press 1 2 4 5 for 12:45.
The stop time appears next to the stop time symbol
Roast
Set stop time
4. Press START.
The oven enters delayed mode. The oven turns on when the start time (in this
example, 12:00 pm) is reached.
At the end of the programmed cooking time, the oven turns off and a beep
sounds. Open the oven door or press COOK TIME to turn off the beep sound.
To change a delayed timed mode without starting the oven, press STOP TIME.
You can then set a new stop time and change the oven mode and temperature.
Note:
• It is not possible to set a stop time when using a probe (some models).
• The maximum stop time setting allowed in 12-hour display mode is 11:59hours,
or 23:59 hours in 24-hour display mode.
• It is also possible to set a stop time without setting a cook time. Then the oven
starts immediately and stops automatically.
QQ EP
:
am
1
P RT
W
QW QT
r
RPP
°
W
:
QQ EP
:
am
1
P RT
W
QW QT
r
RPP
°
:
:
:
: