Accessories - Thermador M271E Série Guide D'utilisation Et D'entretien

Oven Bottom

Accessories

Inserting Rack
Flat Rack
10
The oven bottom conceals the lower heating element. As a result the element is
protected from damage and spills.
Note: Do not place food directly on the oven bottom.
m
Warning:
Do not use aluminum foil or protective liners to line any part of the ap-
pliance, especially the oven bottom. Installation of these liners may
result in a risk of electric shock or fire.
The rack is designed with a stop so it will stop before coming completely out of the
oven and not tilt.
m
Caution:
To avoid burns, place oven racks in desired positions before turning
oven on. Always use oven mitts when the oven is warm. If a rack must
be moved while the oven is hot, do not let oven mitts contact hot heat-
ing elements.
Inserting Rack into Oven:
Removing Rack from Oven:
1. Grasp rack firmly on both sides and pull rack toward you.
2. When the stop is reached, tilt rack up and pull the rest of the way out.
Flat Rack
Do not clean in the self-clean oven.
Broil Pan and Grid
Use for broiling and roasting. Do not clean
in the self-clean oven.
1. Grasp rack firmly on both sides.
2. Insert rack (see picture).
3. Tilt rack up to allow stop into rack
guide.
4. Bring rack to a horizontal position and
push the rest of the way in. Rack
should be straight and flat, not crooked.