Removing The Charger; Maintenance And Care; Notes Regarding Environmental; Protection - EUFAB 16615 Manuel De L'opérateur

6.5 REMOVING THE CHARGER

CAUTION
First pull the plug out of the socket and
observe the sequence for disconnection. This
prevents sparks from forming. Since charging
generates a detonating gas, this is particularly
important for the sake of your safety.
Disconnect the charger from the mains power
supply.
Then disconnect the black callipers (minus).
Then remove the battery callipers from the
plus pole of the battery (red callipers).
Allow the battery to cool and fi ll the cells with
distilled water to the fi lling level named by
the battery manufacturer. Close the battery
cells using the caps.

7. MAINTENANCE AND CARE

MAINTENANCE
If used correctly, the device is maintenance-free.
CARE
Clean the pole callipers every time the charging procedu-
re is completed. Remove all splashed battery acid from
the pole callipers to prevent corrosion. Clean the device
carefully with a dry cloth. Do not use liquids or chemical
cleaning agents. Never submerge the device in liquids.
Never allow liquid to fl ow over the device.
Before storing the device, roll up the cables properly
using the designated hook in order to prevent damages
to the cables and device. Store the device in a clean and
dry place.

8. NOTES REGARDING ENVIRONMENTAL

PROTECTION

The packaging is made up of environmentally
friendly materials which may be disposed of
via your local recycling points.
Do not put electrical devices into the
household waste. Electronic and electrical
devices must be collected separately and
sent for environmentally friendly recycling.
Contact your community or town administra-
tion for information regarding the disposal of
electrics.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
11