Proper Use Of The Product; Scope Of Delivery; Explanation Of Symbols - EUFAB 16505 Manuel De L'opérateur

Battery maintenance device 12 V 500 mA
OVERVIEW
• Proper use of the product • Scope of delivery • Specifications • Safety notes • Operating instructions • Care and maintenance
• Contact information
WARNING
Read the operating instructions through carefully prior to initial use and observe all of the safety
notes! Not observing such may lead to personal injury, damages to the device or your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a
later date! When passing on the product, please include these operating instructions as well. Please
check the contents of package for integrity and completeness prior to use!

PROPER USE OF THE PRODUCT

The battery maintenance device is designed to ensure that the vehicle battery remains fully charged when the vehicle is not used
for a longer period of time. The battery maintenance devices is suitable for the following lead-acid batteries:
• Wet batteries (WET), lead-acid batteries (fluid electrolyte)
• Gel batteries (gel electrolyte)
• AGM batteries (electrolyte in fibreglass fleece)
• Maintenance-free lead-acid batteries (MF)
Other batteries may not be charged with this device.
The battery maintenance device may not be used as jump-start assistance. First charge the battery of the vehicle completely and
remove the charger before starting the vehicle.
The battery maintenance device may not be used as direct current source or for other purposes.
The battery maintenance device is designed for use in a protected environment at temperatures of -15 °C to +40°C.
This device is not designed to be used by children and people with limited mental capacities or those without experience and/
or knowledge. Keep children away from the device.
The device is not designated for commercial use.
Utilisation according to the intended purpose also includes the observance of all information in these operating instructions,
particularly the observance of the safety instructions. Any other utilisation is considered to be contrary to the intended purpose
and may lead to material damages or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.

SCOPE OF DELIVERY

• Battery maintenance device
SPECIFICATIONS
Battery voltage: 12 V
Battery capacity: 5 – 50 Ah
Charge current: 500 mA
Input: 230 Volt AC, 50 Hz, 14 W
Output: 12 Volt DC, 500 mA

EXPLANATION OF SYMBOLS

Complies with
EC directives
Protective
housing (safety class II)
Fail-safe safety transformer
Output voltage to maximum 50 Volt
F
• Operating instructions
Labelled electrical products
may not be disposed of in
the household waste
130 °C
insulation
Fuse,
switches off at 130 °C
Long mains cable: Approximately 1.05 m
Long charger cable: Approximately 0.94 m
Weight: 0.330 kg
IP 20
Devices with this symbol may
only be operated in the house
(dry environment)
Read the operating instructions
Protection against ingress of
foreign bodies Ø > 12 mm
5