Setting User Data - Beurer BF66 Mode D'emploi

6 Batteries
Remove the batteries from the protective packaging and insert with the correct polarity.
See the diagram inside the battery compartment. When the batteries are inserted, the sca-
le switches on automatically in set-up mode (see Point 7). The date display flashes. If the
scale fails to operate, remove the batteries completely and reinsert them.
Your scale is fitted with a "change battery" indicator. If the scale is operating with a battery
which is too weak, "Lo" appears on the display and the scale will switch off automatically. In this
case, the batteries must be replaced (3 x 1.5 V, AAA (LR03), microlight).
7 Settings
Enter your personal information before using the scale. If no buttons are pressed for 90 se-
conds during the set-up procedure, the scale switches off and any information previously
entered is lost.
Setting the date, time and measuring unit
Press the [set] button when the display is switched off. The [set] button lights up and the date
indicator flashes on the display. Set the date, time and measuring unit (KG, LB, ST) one after
the other by pressing the
• Modifying values: Press
• Confirming entries: Press the [set] button.
After your entries are made, "End" appears on the display and the information is saved.

Setting user data

You must enter personal user parameters in order to measure your body fat percentage and
other physical data.
The scale has 10 memory positions in which you and other members of your family can save
and retrieve personal settings.
• Switch on the display by tapping the scale briefly, forcefully and in an easily audible
manner.
• Wait until the display shows "0.0".
• Press the [set] button to start changing the settings. The first memory position flashes
on the display.
• Now you can enter the following settings:
User data
Memory position
Body size
Age
Sex
Degree of activity
• Modifying values: Press
• Confirming entries: Press the [set] button.
The saved values are then displayed one after the other. The scale is now ready for measure-
ment. The scale switches off automatically if no other actions are performed.
or buttons.
or or press and hold for more rapid progress.
Parameters
1 to 10
100 to 220 cm (3' 3" to 7' 3")
10 to 100 years
male , female
1 to 5
or or press and hold for more rapid progress.
19