Technical Data - Wilo Yonos ECO BMS Notice De Montage Et De Mise En Service

5.2

Technical data

Max. volume flow
Max. delivery head
Speed
Mains voltage
Frequency
Rated current
Energy Efficiency Index (EEI)
Insulation class
Protection class
Power consumption P
Nominal diameters
Pump weight
Permitted ambient temperature
Fluid temperatures at max. ambient
temperature +40 °C
Fluid temperatures at max. ambient
temperature +25 °C
Temperature class
Max. rel. humidity
Maximum permissible operating
pressure
Approved fluids
Emission sound-pressure level
Residual current DI
Electromagnetic compatibility
1)
Reference value for the most efficient circulation pumps: EEI ≤ 0.20
2)
See the following warning
Installation and operating instructions Wilo-Yonos ECO BMS
depends on the pump type, see catalogue
depends on the pump type, see catalogue
depends on the pump type, see catalogue
1~230 V ±10% in acc. with DIN IEC 60038
50/60 Hz
See rating plate
1)
See rating plate
See rating plate
See rating plate
See rating plate
1
see type key
depends on the pump type, see catalogue
-10 °C to +65° C
-10 °C to +95 °C
-10 °C to +110 °C
TF110
≤ 95%
PN 10
Heating water in accordance with VDI 2035 Part 1 and Part 2
Water/glycol mixtures, max. mixing ratio 1:1 (for mixtures
with glycol the conveying data of the pump should be cor -
rected to those for the higher viscosity, depending on the
percentage mixing ratio)
Only use brand-name goods with corrosion protection inhibi -
tors; comply with the manufacturer's specifications and safety
data sheets.
The pump manufacturer's approval must be obtained for
the use of other fluids.
Ethylene/propylene glycol with corrosion inhibitors.
No oxygen binding agents, no chemical sealants (ensure
enclosed system from corrosion perspective according to
VDI 2035; rework leaky points).
Commercially available anti-corrosion agents
rosive anodic inhibitors (e.g. underdosing due to consump -
tion).
Commercially available combination products
ganic or polymer film formers.
Commercially available cooling brines
< 32 dB(A)
≤ 3.5 mA (also see chapter 7.2)
Emitted interference in acc. with:
EN 61800-3:2004+A1:2012 / Residential (C1)
Interference resistance in acc. with:
EN 61800-3:2004+A1:2012 / Industrial (C2)
2) without cor -
2) without inor -
2)
English
25