rautool G1/H/G1
notes on trouble sHootinG
Fault
Motor not running
Motor runs (foot lever is actuated) but tool
not working or only partially
Unit not reaching 450 bar pressure
If the faults cannot be remedied, return tool to REHAU Service Center or to your dealer
36
Removal
- Check plug socket used to see if live.
- Check supply cable for faults (not under pressure) and have it replaced,
if necessary.
- Check oil level, if necessary top up.
- Check hydraulic hose for leakage (not under pressure) and have it replaced,
if necessary.
- Vent system.
- Check oil level, if necessary top up.
- Check hydraulic hose for leakage (not under pressure) and have it replaced,
if necessary.
- Vent system