Technical Information; Technical Data; Safety Devices - ATT Nussbaum SPRINTER MOBIL 2500 Manuel D'exploitation

3

Technical information

3.1

Technical data

SPRINTER MOBIL 2500 - HYMAX PRO 2500
System load capacity
Load distribution
Effective lifting range of
the system
System lift time
System lowering time
Operating pressure
Pressure relief valve
Filling volume oil con-
tainer
Noise level
On-site connection
SPRINTER MOBIL 3000 - HYMAX PRO 3000
System load capacity
Load distribution
Effective lifting range of
the system
System lift time
System lowering time
OPI_SPRINTER MOBIL 2500-3000_V3.1_DE-EN-FR-ES-IT
2,500 kg
Max. 3:2 or 2:3 in or
against the drive- in
direction (Consider the
centre of mass of the
vehicle)
Approx. 990 mm
Approx. 15.8 s with
2,500 kg load
Approx. 10.8 s with
2,500 kg load
Approx. 220 bars
Approx. 260 bars
Approx. 8 litres
≤ 70 dB(A)
3~/N+PE, 400 V, 50 Hz
with 16 A fuses, slow,
according to VDE regu-
lations
3,000 kg
Max. 3:2 or 2:3 in or
against the drive- in
direction (Consider the
centre of mass of the
vehicle)
Approx. 990 mm
Approx. 16.9 s with
3,000 kg load
Approx. 10.9 s with
3,000 kg load
Operating pressure
Pressure relief valve
Filling volume oil con-
tainer
Noise level
On-site connection
3.2

Safety devices

• Over-pressure valve
Hydraulic system fuse against over-pressure.
• Bezel in cylinder connection
Secure against lifting and lowering the system too
fast.
• Main switch (2) with locking device
Fuse to prevent unauthorized use.
• Dead man controls
The corresponding movement stops when the
operating button ("LIFT" (3) or "LOWER" (4)) is re-
leased.
• Foot bumper (15) on the lift
Protection against crushing.
• CE-STOP + acoustic warning signal (optional)
Secure against shear and crushing points in the
foot area.
Approx. 240 bars
Approx. 260 bars
Approx. 8 litres
≤ 72 dB(A)
3~/N+PE, 400 V, 50 Hz
with 16 A fuses, slow,
according to VDE regu-
lations
55