Technical Information; Technical Data; Safety Devices - ATT COMBI LIFT 4.50 S Manuel D'exploitation

3

Technical information

3.1

Technical data

COMBI LIFT 4.50 S
COMBI LIFT 4.65 S
Load distribution
Stroke cylinder (max.)
Max. height (ratchet)
Lifting time
Lowering time
Operating pressure with
load
Pressure relief valve
Operating voltage
Motor capacity
Motor speed
Hydraulic pump
Filling volume oil con-
tainer
Noise level
On-site connection
Wheel free lift
Load carrying capacity
wheel free lift
158
5,000 kg
6,500 kg
max. 2:1 or 1:2 or against
the drive-in direction
Approx. 1,816 mm
Approx. 1,920 mm for
platforms without boxes
Approx. 1,970 mm for
platforms with boxes
Approx. 60 s
with payload
Approx. 54 s
with payload
Approx. 300 bars
Approx. 330 bars
3 x 400 V, 50 Hz
3 kW
2,880 rpm
2.7 cm³/s
Approx. 13 litres (HLP32)
≤ 70 dB(A)
3~/N+PE, 400 V, 50 Hz
with 16 A fuses, slow,
according to VDE regu-
lations
3,500 kg
OPI_COMBI LIFT 4.50/4.65 S PLUS AMS - HYMAX II 4500/4650 S PLUS AMS_V1.1_DE-EN-FR-ES-IT
3.2

Safety devices

• Deadman controls
Lift movement stops when a button is released.
• Reversing switch with curtain lock device
Fuse to prevent unauthorized use.
• Over-pressure valve
Hydraulic system fuse against over-pressure.
• Check valve
Secure the vehicle against unauthorized lowe-
ring.
• Safety catch
Secure against unauthorized lowering of the lift.
• CE-Stop
Acoustic warning signal when lowering below 200
mm above the floor.
Secure against crushing in the foot area when ne-
aring the floor.
• Roll back and roll over safety at the ends of the
drive-in rails
Secure against falling vehicles in the raised con-
dition.