1. Manuels
  2. Marques
  3. ATT Manuels
  4. Systèmes de levage
  5. COMBI LIFT 4.50 S
  6. Manuel d'exploitation

System Master Sheet; Manufacturer; Purpose; Changes To The Design/Construction - ATT COMBI LIFT 4.50 S Manuel D'exploitation

Masquer les pouces
Table des Matières

Publicité

2

System master sheet

2.1

Manufacturer

Otto Nußbaum GmbH & Co.KG
Korker Straße 24
D-77694 Kehl-Bodersweier
2.2

Purpose

The lift is a lifting tool for raising vehicles up to a total weight of 5,000 kg (Combi Lift 4.50) or. 6,500 kg (Combi
Lift 4.65), for a maximum lift distribution of 2:1 in the drive-in or against the drive-in direction.
The wheel free lift is a lifting tool for raising vehicles up to a total weight of 3,500 kg, for a maximum lift dis-
tribution of 2:1 in the drive-in or against the drive-in direction.
The lift has been designed for stopping under the load receiving fixture. It is not set up for stepping onto the
drive-in rails or for conveying people. The set up of the standard lift is not permitted in explosion endange-
red work shops and washing halls.
After construction and maintenance changes on load carrying parts the lift must be inspected afterwards
by a specialist who approves the changes. If the set up location is changed, the lift must be checked
again by a specialist and changed approved.
2.3

Changes to the design/construction

Inspections by a technical expert are required before recommissioning (date, type of change, technical
expert signature).
______________________________________________________________________________________________________
______________________________________________________________________________________________________
Name, address of technical expert
_________________________________________________
Location, date
2.4

Changing the assembly location

Inspections by a technical expert are required before recommissioning (date, type of change, specialist
signature).
______________________________________________________________________________________________________
______________________________________________________________________________________________________
Name, address of technical expert
_________________________________________________
Location, date
OPI_COMBI LIFT 4.50/4.65 S PLUS AMS - HYMAX II 4500/4650 S PLUS AMS_V1.1_DE-EN-FR-ES-IT
_________________________________________________
Technical expert signaturer
_________________________________________________
Technical expert signaturer
155

Publicité

Table des Matières
loading

Manuels Connexes pour ATT COMBI LIFT 4.50 S

Contenu connexe pour ATT COMBI LIFT 4.50 S

Ce manuel est également adapté pour:

Combi lift 4.50 s amsCombi lift 4.50 s plusCombi lift 4.50 s plus amsHymax ii 5000 sHymax ii 5000 s amsHymax ii 5000 s plus ... Afficher tout

Table des Matières