English; Introduction - ATT COMBI LIFT 4.50 S Manuel D'exploitation

ENGLISH

Introduction

Nussbaum products are a result of many years of
experience. A high quality standard and superior
concept guarantees you reliability, long lifetimes
and economical operation. To prevent unnecessa-
ry damage and hazards, read this operating ma-
nual carefully and always comply with its contents.
Any other use, or use beyond purpose is consi-
!
dered improper.
Otto Nußbaum GmbH & Co.KG is not liable for
!
any resulting damage. The operating company
alone carries the risk.
Proper use also includes:
• Adherence to all instructions in this operating ma-
nual and
• Compliance with inspection and maintenance
work and the inspections stipulated.
• The operating manual is to be followed by all per-
sonnel working on the system. This is notably with
regards to Section 4 "Safety conditions"
• In addition to safety information from the opera-
ting manual, comply with rules and regulations at
the location of use.
• Proper system handling
Operating company obligations:
The operating company is obliged to only permit
personnel to work on the system who
• understand the principle regulations about work
safety and accident prevention and who have
been trained in working with the system.
• have read the safety section and warning infor-
mation in this operating manual, have under-
stood it and confirmed learning with a signature.
Hazards in working with the system:
Nussbaum products have been designed and built
to state-of-the-art and to recognized safety stan-
dards. However, improper use may lead to hazards
to life and limb of the user or result in property da-
mage.
The system may only be operated
• for proper intended use
• if it is technically in perfect condition
Organizational measures
• The operating manual is always to be kept ready
at the location of use of the system.
• Supplemental to the operating manual, refer to
OPI_COMBI LIFT 4.50/4.65 S PLUS AMS - HYMAX II 4500/4650 S PLUS AMS_V1.1_DE-EN-FR-ES-IT
and comply with generally valid legal and other
binding regulations for accident prevention and
for environmental protection.
• Check occasionally that personnel have an awa-
reness of hazards and safe work in compliance
with the operating manual!
• Use personal protective equipment as needed or
required by regulations.
• All safety and hazard information on the system is
to be kept in a legible condition!
• Replacement parts must meet technical specifi-
cations of the manufacturer. This is only guaran-
teed for original parts.
• Deadlines pre-set or given in the operating ma-
nual for repeating tests / inspections must be fol-
lowed.
Maintenance work, error removal
Comply with pre-determined setting, maintenance
and inspection work and intervals in the operating
manual, including details for exchanging parts/part
fittings! These activities may only be done by spe-
cialists who have participated in a special factory
training.
Guarantee and liability
• In principle, our "General sales and supply condi-
tions" apply.
• Guarantee and liability claims for personal and
property damage are excluded if due to one or
more of the following causes:
• Improper use of the system.
• Improper assembly, commissioning, operation
and maintenance of the system.
• Operating the system with defective safety de-
vices or improperly attached or non-functional
safety and protection devices.
• Non-compliance with information in the opera-
ting manual in terms of transport, storage, assem-
bly, commissioning, operation, maintenance and
fitting of the system.
• Independent construction changes to the system.
• Independent changes to the system (e.g. drive
ratios: power, rotation speed, etc.)
• Improperly done repairs.
• Catastrophic cases due to foreign influences or
force majeure.
Translation
151