Charge The Rechargeable Battery; Set The Time Of Day - Miele HS17 Mode D'emploi

 Insert the power unit connector sup‐
plied into the socket at the top of the
storage compartment (dia. 06)
 Connect the mains connection cable
to the power supply unit and the
mains plug to an electrical socket
(dia. 07).
The contact indicator will light up red
on the base station.
 Stow the power supply unit in the
storage compartment in the base sta‐
tion and feed the mains connection
cable through the slot (dia. 08).
 Place the base station on a level sur‐
face against a free wall. Ensure that
there is an obstacle free distance of
at least 1.5 m in front and 0.5 m to
the right and left of the base stati‐
on (dia. 09).

Charge the rechargeable battery

(dia. 10)
The rechargeable battery is supplied
not fully charged. It needs to be charg‐
ed fully before first use.
The battery can also be charged when
the robot vacuum cleaner is switched
off (OFF switch). In this case, the vac‐
uum cleaner indicators will not react.
 Connect the robot vacuum cleaner
correctly to the charging contacts on
the base station.
Do not lift the robot vacuum cleaner
by the area around the dust box as it
can come loose.
The base station contact indicator will
go out as soon as the robot vacuum
cleaner has been positioned correctly.
The battery will charge and the battery
status indicator will flash in the display.
The charging process takes up to 120
minutes and is complete when the bat‐
tery status indicator in the display lights
up green. You can then vacuum for up
to two hours.
You can also charge the battery without
using the base station directly via the
power supply unit.
 Insert the power supply unit connec‐
tor into the socket on the side of the
robot vacuum cleaner (dia. 11).
 Connect the mains connection cable
to the power supply unit and the
mains plug to an electrical socket
(dia. 07).
Rechargeable battery status indica‐
tor in the display
Red charged capacity approx. 0%
- 20%
Or‐ charged capacity approx.
ange 20% - 50%
Green charged capacity approx.
50% - 100%
Set the time of day (dia. 12)
Use the remote control to set the clock.
 Press the Clock button for three se‐
conds.
The hour indicator will flash in the clock
display on the robot vacuum cleaner.
 Press the + or - direction button to
set the current hour.
en
43