Items Supplied; Technical Data; Proper Use - EINHELL DBN 280 Instructions D'utilisation Et D'entretien

Anleitung DBN 280
GB
Dear Customer,
Before you use the sheet metal nibbler for the first
time, please read these instructions and note the
information for the tool's operation and maintenance.
Always keep this manual with the tool.

1. Items supplied

1 sheet metal nibbler
1 plug-in nipple R 1/4"
}
1 punch socket
already mounted
1 punch (knife)

2. Technical data

Permissible working pressure max.
Strokes
Sheet metal thickness max.
Air consumption
Recommended hose diameter internal
Air quality
cleaned and oiled
Air supply
via conditioning unit with filter pressure
reducer and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a
motor rating of 2.2 kW
Work settings
6 bar working pressure set at the pressure
reducer or filter pressure reducer
Please note:
When working with the sheet metal nibbler, be
sure to wear the necessary protective clothing,
particularly goggles.
Observe the safety regulations.
4
13.11.2001 7:46 Uhr
6 bar
3500 min
1.2 mm
255 l/min.
Ø 9 mm
Seite 4
3. Illustration
C
D
E
Item Description
A plug-in nipple for the air supply
B trigger lever
C exhaust air cover
D socket punch
E punch (knife)

4. Proper use

The sheet metal nibbler is a handy pneumatic tool for
use in DIY and automotive workshops. It is ideal for
cutting all types of sheet metal up to a maximum
thickness of 1.2 mm.
The exhaust air leaves the tool through an opening
to the front. The punch socket and the punch can be
changed quickly and easily. The air supply is
connected to the tool by means of a quick-release
coupling.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.
B
A