Charging The Battery - Bosch BCR1 Mode D'emploi

Before starting
8
9
78

Charging the battery

!
Caution
Only charge the robot vacuum using the charging sta-
tion provided.
8
Fig.
Position the robot vacuum with its back against the
charging station and wait for charging to be indicated.
Note
If charging is not indicated, press the back of the robot
vacuum onto the charging contacts.
Note
If you have not used the robot vacuum (and conse-
quently the battery) for a long time, the battery may
have discharged. The battery is protected to prevent it
being damaged by this. If the battery has discharged, it
may take up to two minutes for the battery indicator to
light up once charging has started.
9
Fig.
The charging indicator will flash during the charging
process.
Once the battery is fully charged, the charging indicator
will stay lit and stop flashing.
It is completely normal and quite safe for the charging
station and the robot vacuum to heat up while charging.
You can find detailed information about the charge in-
dicator in the "Indicators and signals" section. Fig.
en
33