Bosch BCR1 Mode D'emploi page 104

Cleaning and care
a
43
b
c
d
104
Cleaning the lint filter
43
Fig.
The lint filter should be cleaned regularly to keep the robot
vacuum working at its best.
Take the filter unit with dust box out of the robot va-
41
cuum. Fig.
Take the dust box out of the filter unit.
42
Fig.
Clean the lint filter.
a) Pull the lint filter out of the filter unit by the tab.
b) It is usually sufficient to lightly shake or tap out the
lint filter when the dust box is emptied in order to
dislodge any particles of dirt.
c) If this is not sufficient, you can use a dry cloth to re-
move dirt particles from the surface.
d) Put the lint filter back in the filter unit once you have
cleaned it.
Note
Make sure you put the lint filter in the right way round.
The filter unit may come loose during operation if the
lint filter is not put in correctly.
en