Energy-Saving Mode - Bosch BCR1 Mode D'emploi

Home Connect en

Energy-saving mode

The appliance will automatically switch to energy-saving
mode (standby) after 10 minutes of inactivity. The ap-
pliance can also be put into energy-saving mode using
the app.
To show that the appliance is in energy-saving mode
and ready to use, the battery indicator will flash briefly
(for 250 ms) every 10 seconds. This flashing also helps
to locate the appliance, for example in poorly lit rooms.
The appliance can be brought out of energy-saving
mode either by pressing one of the buttons ("MAP",
"ALL", "PAUSE" or "SPOT") or via the Home Connect
app.
If the appliance is in energy-saving mode and the bat-
tery is being charged on the charging station, the char-
ging indicator will be displayed.
93