Connecting The Charging Station - Bosch BCR1 Mode D'emploi

Before starting
4
a
b
c
5
76

Connecting the charging station

Do not lay any cables in front of the charging station as
they could prevent the robot vacuum from docking.
4
Fig.
a) Plug the charging cable into the charging station.
b) Wind the rest of the power cable around the cable
tidy.
Do not wind the power cable more than necessary.
c) Plug the mains plug into a power socket.
Before using for the first time
The sensitive surfaces of your robot vacuum are cov-
ered with protective film during transit to prevent the
appliance being damaged or scratched.
5
Fig.
Remove the protective film from the top of your robot
vacuum before using it for the first time.
en