Bosch BCR1 Mode D'emploi page 83

Cleaning programmes and operating modes
15
2x
16
3x
Stopping the cleaning programme
15
Fig.
When paused, pressing the "Go Home/Pause" button
again will stop the active cleaning programme.
The robot vacuum is ready to use. This will be indi-
cated by the buttons flashing at 5 second intervals.
"Go Home" function
16
Fig.
Once stopped, pressing the "Go Home/Pause" button
a third time will send the robot vacuum back to where
it started cleaning.
If you have placed the robot vacuum somewhere it
does not recognise and activated the "Go Home"
function, the robot vacuum will spend 10 minutes try-
ing to find the charging station.
If you have started and stopped a cleaning programme
before activating the "Go Home" function, the robot
vacuum will return to its original position.
If it started cleaning from the cleaning station, the
robot vacuum will return to the charging station.
Note
If you send the robot vacuum back to where it started
using the "Go Home" function, its journey cannot be
paused. Pressing the "Go Home/Pause" button will stop
the robot vacuum.
en
83