Connector Panel - Sony VPL-PX15 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connector Panel

Left side
INPUT B
PC CARD
INPUT B
PC CARD
4
(This illustration shows the VPL-PX15.)
1 AC IN socket
Connects the supplied AC power cord.
2 INPUT A connectors
Connect to external equipment such as a computer.
INPUT A connector (HD D-sub 15-pin, female):
Connects to the monitor output on a computer
using the supplied cable.
When inputting a component or 15k RGB signal,
use the appropriate cable.
For details, see "To connect 15k RGB/Component
equipment" on page 21 (GB).
AUDIO jack (stereo minijack): Connects to the
audio output of the computer.
3 CTRL S /PLUG IN POWER (DC 5V output)
jack (stereo minijack)
Connects to the control S out jack of Sony equipment.
Connects to the CONTROL S OUT jack on the
supplied Remote Commander to use it as a wired
remote control unit. In this case, you do not need to
install batteries in the Remote Commander, since the
power is supplied from this jack.
MOUSE
AUDIO
VIDEO S VIDEO
PLUG IN POWER
CTRL S
AUDIO
INPUT A
~AC IN
56 7
8
MOUSE
AUDIO
VIDEO S VIDEO
PLUG IN POWER
CTRL S
AUDIO
INPUT A
~AC IN
3
2
1
Location and Function of Controls
4 INPUT B connectors (VPL-PX15 only)
INPUT B PC CARD slot (Type II): A wireless
LAN PC card or PC memory card can be installed
according to your requirements.
For details, see "Installing a PC card" on page 21 (GB).
INPUT B ETHER connector (10BASE-T/
100BASE-TX): Connects to a computer on a
LAN with a LAN cable when you use the
networking function of this projector.
5 MOUSE connector (6-pin)
Connects to the PS/2 mouse port on a computer via
the supplied mouse cable, to control the mouse
function of the connected computer.
6 USB connector (USB B-plug for upstream, 4-
pin)
Connects to a computer. When you connect the
projector to the computer via this connector, the
projector recognizes that a USB mouse is connected
and you can control the mouse function of the
computer connected to the INPUT A connector using
the supplied Remote Commander. The supplied
application software can be used on the computer
connected to this connector.
7 USB connector (USB A-plug for downstream, 4-
pin)
Connects to USB equipment such as a mouse, camera,
etc.
8 Video input connectors
Connect to external video equipment such as a VCR.
S VIDEO connector (mini DIN 4-pin): Connects to
the S video output (Y/C video output) of video
equipment.
VIDEO jack (phono type): Connects to the
composite video output of video equipment.
AUDIO jack (stereo minijack): Connects to the
audio output of the VCR.
13
(GB)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vpl-px10Vpl-ps10

Table des Matières