Charging The Battery - HAIRCUT TH32 Guide De L'utilisateur

3

Charging the battery

It is essential to charge the clipper battery for about 5 hours before
using the clippers for the first time.
The ideal temperature range for use of the charger is between 5°C and 40°C.
The charging time is about 1.5 hours. The battery reaches its full capacity
after 3 or 4 charging cycles.
3.1 Charging the battery from the mains power supply
Figure 2: Charging the clipper
battery directly from the mains
power supply.
1. Switch the clippers off by pressing the
On/Off button (Figure 1, D).
2. Insert the power pack connector
(Figure 2, B) in the socket (Figure 2,
A).
3. Insert the power pack (Figure 1, M) in
the mains power socket.
4. The red indicator light (Figure 1, J)
comes on steadily during the charging
period. Indicator lights (Figure 1, G
and H) come on to show the battery
charge level remaining to be reached.
5. Both indicator lights (Figure 1, G et J)
come on steadily when the battery
charge cycle has been completed. The
autonomy time is then 90 minutes.
6. Unplug the power pack; the clippers
can be used without the lead.
24