Charging The Battery - HAIRCUT TH35 Manuel D'utilisation

EN
3. USE

3.1. CHARGING THE BATTERY

It is essential to charge the battery for about 2 hours before using the
clippers for the first time. Charge the clippers at least once during the year
following the date of delivery. The battery reaches its full capacity after 3
or 4 charging cycles.
 The equipment must only be used with the
power pack it was supplied with.
 WARNING: To recharge the battery, use
only the removable power pack supplied
with the equipment.
When charging, it is advisable to switch the clippers off (On/Off button set
to 0, Fig. 1-B).
3.1.1. Charging the clippers from the mains supply
 Insert the electrical lead into the socket of the clippers (Fig. 2a).
 Connect the power pack (Fig. 1-L) to a mains power socket.
 During charging, the indicator light flashes.
 At the end of charging, the indicator light comes on steadily. Unplug the power
pack. The clippers can then be used without the electrical lead.
Use only with the
HP12D-0502000-AE power
pack.
24