Charging The Battery - HAIRCUT TH33 Guide De L'utilisateur

3

Charging the battery

It is essential to charge the clipper battery for about 2 hours before
using the clippers for the first time.
The ideal temperature range for use of the charger is between 5°C and 40°C.
The charging time is about 2 hours. The battery reaches its full capacity after 3
or 4 charging cycles.
3.1 Charging the battery from the mains power supply
Figure 2: Charging the clipper
battery directly from the mains
power supply.
1. Switch the clippers off by pressing the
On/Off button (Figure 1, D).
2. Insert the power pack connector
(Figure 2, B) in the socket (Figure 2, A)
on the clippers.
3. Insert the power pack (Figure 1, L) in
the mains power socket.
4. The red indicator light (Figure 1, K)
comes on steadily during the charging
period. Indicator lights (Figure 1, G, H
and J) come on to show the battery
charge level remaining to be reached.
5. All three indicator lights (Figure 1, G,
H et J) come on steadily when the
battery charge
completed. The autonomy time is
then 150 minutes.
6. Unplug the power pack; the clippers
can be used without the lead.
23
cycle has been