Noise/Vibration Information; Description Of The Symbols - Ayce PC650ID Manuel D'utilisation

NOISE/VIBRATION INFORMATION

Measured sound values determined according to EN 60745.
WEAR HEARING PROTECTION!
Vibration total values (triax vector sum) determined according to EN 60745: The
vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to
protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
180605_ayce_PC650ID_IM

DESCRIPTION OF THE SYMBOLS

1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible risks.
The safety symbols and the explanations that accompany them must be perfectly
understood. The warnings in themselves do not remove the risks and cannot replace
correct actions for preventing accidents.
This symbol, marking a point of safety, indicates a caution,
!
warning or danger. Ignoring this warning can result in an
accident to yourself or others. To limit the risks of injury,
WARNING
fire or electrocution, always follow the recommendations
indicated.
Before any use, refer to the corresponding section in this user
manual.
These symbols indicates the requirement of wearing ear
protection, eye protection, respirator and gloves when using
the product.
Conform to CE safety standards.
Class II symbol: this machine is designed with double
insulation. It is not necessary to connect it to an earthed
power socket.
82 83 |
GB
180605_ayce_PC650ID_IM