Before The First Usage; Operation; Filling With Water - SilverCrest SDRB 1000 A1 Mode D'emploi

Attention!
• Should the care instructions in the clothing item
forbid ironing (Symbol
steam brush on it. Should you do so, the clothing
item could be permanently damaged.
• The watertank 1 is to be filled exclusively with
mains water (or a mix of distilled and mains wa-
ter). You will otherwise damage the appliance.
• You may not clean the appliance with solvents,
alcohol or abrasive cleaning agents. These could
cause damage to it.

Before the First Usage

• Remove the steam brush from the packaging.
• Remove all possible adhesive tags and protective
foils from the steam iron.
• Remove the protective cap from the brush attach-
ment w.
Attention!
Plastic bags can be dangerous. To avoid fatalities
through suffocation, keep plastic bags out of the
reach of children.
Note:
As every steam brush is tested for functionality after
manufacture, it is possible that there may be droplets
of water in the watertank 1.
• Fill the watertank 1 with water (see chapter

"Filling with water").

• Insert the power plug 7 into a correctly instal-
led and earthed mains power socket.
• Hold the steam brush horizontally.
• Place the temperature regulator 3 at the posi-
tion "MAX".+
), you may not use the
• Heat the steam brush up at the highest setting
for a few minutes. By doing this you will clear
production residues from the sole of the iron 0.
• Activate the steam shot button 8 a few times, so
that steam exits from the sole of the iron 0 .
• Then iron a redundant piece of material, this will
remove any impurites that may possibly be on
the sole of the iron 0.
Note:
On the first heating up of the appliance a small volume
of smoke and smell may be generated, caused by
production residues. This is completely normal and
is not dangerous. Provide for sufficient ventilation,
for example, open a window.

Operation

Notes
• Should the care instructions in the clothing item
forbid ironing (Symbol
the steam brush on it. If you do so, the clothing
item could be permanently damaged.
• Do NOT use the appliance on leather, velvet, im-
pregnated furniture or steam sensitive materials.
If you do, the material/furniture could become
damaged.
Filling with water
Attention!
Fill the watertank 1 exclusively with tap water or distil-
led water mixed with tap water. Never fill watertank 1
with chemical substances, cleaning agents (with the ex-
ception of decalcification agents) or other liquids.
Do not use chemically distilled water. This would
irreparably damage the appliance.
- 6 -
), you may not use