16.7.4. The image is blurred.
•
The camera was moved during the shot.
•
The subject was outside the camera's focal range. Use the
Macro mode for close-up pictures, where applicable.
•
Improve the light conditions.
16.7.5. The image is not shown on the display.
•
An SD card has been inserted which took pictures in non-DCF
mode on another camera. The camera cannot display this
type of image.
16.7.6. The period of time between shots is
longer when taking pictures in the dark
•
The shutter usually works more slowly in poor light condi-
tions. Change the angle of the camera, or improve the light
conditions.
16.7.7. The camera switches itself off.
•
The batteries are empty.
•
The wrong battery type is set.
•
After a preset period, the camera switches itself off to save
the battery charge. Restart the camera.
16.7.8. The shot has not been saved.
•
The camera was switched off before the shot could be saved.
•
The memory card is full.