Safety Precautions; Electrical Safety; Outdoor Use - Evolution R255 SMS Notice Originale

SAFETY PRECAUTIONS

SAVE ALL WARNINGS &

ELECTRICAL SAFETY

INSTRUCTIONS FOR FUTURE
(1.14)
REFERENCE
This machine is fitted with the correct moulded
plug and mains lead for the designated market. The term "power tool" in the warnings refers to
If the supply cord is damaged, it must be your mains-operated (corded) power tool or
replaced by a special cord or assembly available battery-operated (cordless) power tool.
from the manufacturers or its service agent.
(2.2)
[Work area safety]
For added protection use a residual current
device (R.C.D.) that will interrupt the supply if a) Keep work area clean and well lit.
the leakage current to earth exceeds 30mA for Cluttered or dark areas invite accidents.
30ms. Always check the operation of the residual b) Do not operate power tools in explosive
atmospheres, such as in the presence of
current device (R.C.D.) before using the machine.
flammable liquids, gasses or dust. Power tools

OUTDOOR USE

create sparks which may ignite the dust or fumes.
(1.15)
WARNING: For your protection if this tool c) Keep children and bystanders away while
is to be used outdoors it should not be operating power tool. Distractions can cause
exposed to rain, or used in damp locations.
you to lose control.
d) Do not use this machine in an
Do not place the tool on damp surfaces.
Use a clean, dry workbench if available. For enclosed room.
added protection use a residual current
device (R.C.D.) that will interrupt the supply
(2.3)
if the leakage current to earth exceeds 30mA [Electrical Safety]
a) Power tool plugs must match the outlet.
for 30ms. Always check the operation of
the residual current device (R.C.D.) before Never modify the plug in any way.
using the machine. If an extension cable is Do not use any adapter plugs with
required it must be a suitable type for use earthed (grounded) power tools.
outdoors and so labelled. The manufacturers
Unmodified plugs and matching outlets will
instructions should be followed when using reduce the risk of electric shock.
an extension cable. b) Avoid body contact with earthed
or grounded surfaces, such as pipes,
POWER TOOL GENERAL
radiators, ranges and refrigerators. There is
(2.1)
SAFETY INSTRUCTIONS
an increased risk of electric shock if your body
WARNING: When using electric tools is earthed or grounded.
basic safety precautions should always c) Do not expose power tools to rain or wet
be followed to reduce the risk of fire, conditions. Water entering a power tool will
electric shock and personal injury including
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
the following.
for carrying, pulling or unplugging the power
Note: This power tool should not be powered on tool. Keep cord away from heat, oil, sharp
continuously for a long time. edges or moving parts.
Damaged or entangled cords increase the risk of
WARNING: Read all safety warnings and electric shock.
instructions before attempting to operate e) When operating a power tool outdoors,
this product and save these instructions. use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
Failure to follow the warnings and instructions
may result in electric shock, fire and/or reduces the risk of electric shock.
f) If operating a power tool in a damp
serious injury.
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
6
www.evolutionpowertools.com
1. General Power Tool Safety Warnings
2. General Power Tool Safety Warnings
www.evolutionpowertools.com
3) General Power Tool Safety Warnings b) Do not use the power tool if the switch does
(2.4)
[Personal Safety]. not turn it on or off. Any power tool that cannot
a) Stay alert, watch what you are doing and use
be controlled with the switch is dangerous and must
common sense when operating a power tool. Do
be repaired.
not use a power tool while you are tired or under c) Disconnect the power tool from the power
the influence of drugs, alcohol or medication. A source and/or battery pack from the power
tool before making any adjustments, changing
moment of inattention while operating power tools
accessories, or storing power tools.
may result in serious personal injury.
b) Use personal protective equipment. Always
Such preventative safety measures reduce the risk of
wear eye protection to prevent injury from
starting the power tool accidentally.
sparks and chippings. Protective equipment such d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
as dust masks, non-skid safety shoes, hard hat or
with the power tool or these Instructions to
hearing protection used for appropriate conditions
operate the power tool. Power tools are dangerous
will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
in the hands of untrained users.
switch is in the off-position before connecting to e) Maintain power tools. Check for misalignment
power source and or battery pack, picking up or or binding of moving parts, breakage of moving
carrying the tool. parts and any other condition that may affect
the power tools operation. If damaged, have the
Carrying power tools with your finger on the switch
power tool repaired before use. Many accidents
or energising the power tools that have the switch on
invites accidents. are caused by poorly maintained power tools.
d) Remove any adjusting key or wrench before f) Keep cutting tools sharp and clean. Properly
turning the power tool on.
maintained cutting tools with sharp cutting edges are
A wrench or key left attached to a rotating part of a less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
power tool may result in personal injury.
e) Do not overreach. Keep proper footing and etc. in accordance with these instructions, taking
balance at all times. This enables better control of into account the working conditions and the
the power tool in unexpected situations. work to be performed. Use of the power tool for
f) Dress properly. Do not wear loose operations different from those intended could result
clothing or jewellery. Keep your hair, clothing in a hazardous situation.
and gloves away from moving parts. Loose h) Keep handles and grasping surfaces dry,
clothes, jewellery or long hair clean and free from oil and grease.
can be caught in moving parts. Slippery handles and grasping surfaces do not
g) If devices are provided for the connection of allow for safe handling and control of the tool in
dust extraction and collection facilities, ensure unexpected situations.
that these are connected and properly used.
Use of dust collection can reduce
(2.6)
dust-related hazards. [Service] a) Have your power tool serviced by
h) When cutting metal, gloves should be worn a qualified repair person using only identical
before handling to prevent from getting burnt replacement parts. This will ensure that the safety of
from hot metal. the power tool is maintained.
i) Keep handles and grasping surfaces dry, If the supply cord of this power tool is damaged,
clean and free from oil and grease. Slippery it must be replaced by a specially prepared supply
handles and grasping surfaces do not allow
cord available through the service organization.
for safe handling and control of the tool in
unexpected situations.
(3.5)
• Not to use saw blades manufactured from
4) General Power Tool Safety Warnings
(2.5)
[Power tool use and care].
• Use only the saw with guards in good
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better
• Always to clamp work-pieces to
and safer at a rate for which it was designed.
7
5) General Power Tool Safety Warnings
MITRE SAW SPECIFIC SAFETY
high speed steel.
working order and properly maintained, and
in position.
the saw table.
EN
ES
DE
FR
IT
PL
PT
RO