Functioning Modes - Erreka VIVO-M201 Manuel De L'installateur

Behaviour when connecting the power
supply
With the control board now programmed, if the power
supply goes off and returns, pressing any key device will
make the control board carry out an opening operation,
regardless of the position of the leaves.
3

FUNCTIONING MODES

Automatic mode (DIP4 = ON)
Opening: this begins by activating the key device
(transmitter, magnetic key, key switch, etc).
• Step-by-step opening (DIP3=ON): if, during the
opening process, the key device is activated, the two
leaves of the gate come to a stop. The gate closes if
activated again.
• Community opening
opening, the control board does not obey the key
commands.
Step-by-step mode (DIP4 = ON)
Opening: this begins by activating the key device
(transmitter, magnetic key, key switch, etc).
• Step-by-step opening (DIP3=ON): if, during the
opening process, the key device is activated, the two
leaves of the gate come to a stop. The gate closes if
activated again.
• Community opening
opening, the control board does not obey the key
commands.
(in pedestrian and total operation)
(DIP3=OFF): during
(in pedestrian and total operation)
(DIP3=OFF): during
DESCRIPTION OF THE PRODUCT
S t a n d b y : t h e g a t e r e m a i n s o p e n d u r i n g t h e
programmed time.
• If, during standby, the safety device is activated,
standby time starts again.
• DIP6=OFF: if, during standby, the key device is
activated, standby time starts again.
• DIP6=ON (automatic mode optional): if, during
standby, the key device is activated, the gate begins
to close.
Closing: at the end of standby time (or when using the
key device if DIP6=ON), the closing operation begins.

If the key device is activated during closing, the gate
reverses operation direction and opens completely.
Standby: the gate remains open until a key command
is received.
Closing: closing starts by running the key device.

If the key device is activated during closing, the gate
reverses operation direction and opens completely.
Control board VIVO-M201(M)
25