Description Of The Product; Elements Of The Complete Installation - Erreka VIVO-M201 Manuel De L'installateur

DESCRIPTION OF THE PRODUCT

1

ELEMENTS OF THE COMPLETE INSTALLATION

INSTALLATION COMPONENTS:
1 Operator 1 (VULCAN)
2 Operator 2 (VULCAN)
3 Flashing light
4 Leaf 1
5 Leaf 2
6 Exterior photocells
7 Key switch (key device)
8 Wall button (key device)
9 Control board
10 Connections box
11 Underground electrical installation
12 Interior photocells
13 Electrolock
14 External closing stopper
15 Opening stopper
16 Antenna
17 Traffic light
ELECTRICAL CABLING:
Element
A: Main power supply
B: Flashing light
C: Photocells (Tx/Rx)
D: Key switch
E: Operator
F: Antenna
Fig. 1 Elements of the complete installation (swing gate)

The safe and correct operation of the
installation is the responsibility of the installer.

The stop on closing (14) is an essential element.

The photocells (6) and (12) provide additional safety to
that already provided by the control board. For greater
safety, Erreka recommends installing the photocells (6)
and (12).
Nº wires x section
2
3x1.5 mm
2
2x0.5 mm
2 2
2x0.5mm / 4x0.5mm
2
2x0.5 mm
2
4x0.75 mm
k
Coaxial cable 50 (RG-58/U)

The installation starts up using the push button (8)
or key switch (7), or using the radio transmitter.
Maximum length
30m
30m
30m
25m
20m
5m
Control board VIVO-M201(M)
English
23