Check the seal between lid and housing after
cleaning and reassembling the strainer. An
improperly sealed lid will result in air sucked
in by the sea water pump of the engine which
again will result in overheating of the engine.
To prevent damage of the water strainer, dur
ing frost in the winter time, either the water
must be drained or the installation must be
filled with antifreeze.
Remove the hoses to drain the strainer; the
housing is not equipped with a drain plug.
Take care that during filling with anti-freeze
no anti-freeze is spilled into the waterway.
Anti-freeze is poisonous.
Model
CWS 1
1
CWS 1
/
4
CWS 1
1
/
2
Cooling water strainer model CWS
Technical data
Material
housing
strainer element
lid
Weight
Max. ambient temp. : 75 °C (167°F)
Max. water temp.
Max. pressure
Hose connection
G 1
G 1
1
/
4
G 1
1
/
2
ENGLISH
: Polypropylene GF
: HD Polyethylene
: Styrol/Acrylnitrile SAN
: 6.2 kg (13,7 lb)
: 55 °C (131°F)
: 7.5 bar
(750 kPa, 109 psi)
Recommended capacity
in normal use
l/min
Imp.Gal/min
US Gal/min
91
20
143
31
200
44
030507.01
24
38
53
5