Ordering Replacement Parts - EINHELL KGSZ 330 Mode D'emploi

Anleitung KGSZ 330 SPK 1
button (16).
Carry the crosscut and miter box saw by its
integral carry-handle (31) and the side of the
base.
8. Maintenance
Always keep the machine's ventilation slats clean
and free of obstructions.
Remove dust and dirt regularly from the machine.
Cleaning is best done with compressed air or a
rag.
Lubricate all moving parts at regular intervals.
Never use caustic agents to clean plastic parts.

9. Ordering replacement parts

Please provide the following information on all orders
for replacement parts:
Model/type of machine
Article number of the machine
ID number of the machine
Number of the required replacement part
02.09.2004 10:25 Uhr Seite 17
GB
17