Cleaning/Maintenance; Cleaning & Maintenance; Cleaning The Appliance; Storage - Parkside PNTS 1300 C3 Traduction Du Mode D'emploi D'origine

Masquer les pouces Voir aussi pour PNTS 1300 C3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB

Cleaning/Maintenance

Pull out the mains plug.
This will prevent danger of injury
from electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.

Cleaning the appliance

Never hose the appliance
down with water. Never use
aggressive cleaning agents
or solvents. This could dam-
age the appliance.
After use, empty the waste tank (
Clean the waste tank with a damp cloth.
Wash the foam filter (
warm water and soap, and allow to
dry. If necessary, wash with lukewarm
water and soap and allow to dry.
Beat out the material filter (
Replace the paper filter bag (
when full (see "Replacement parts/Ac-
cessories" for reordering).
Tap the optionally available folded
filter and clean it with a brush or hand-
brush.

Storage

- For storage, wind the power
cord (9) around the retaining
bracket (8) on the back of the
device.
- Insert the separated vacuum
tubes (12) into the accessory
holder on the appliance feet (7).
- The attachment ports on the mo-
34
Disposal/Environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
6).
rated, accurately graded and passed on
for recycling. Contact our Service Centre
15) with luke-
for more details.
Defective units returned to us will be dis-
posed of for free.
16).
17)
tor part serve as nozzle storage
(
4) or on the feets (7).
- Store the appliance in a dry
place and out of reach of chil-
dren.
Machines must not be disposed of
with household refuse.

Publicité

Table des Matières
loading

Table des Matières