Control Sections And Connections; Function And Application - Festo DGC-HD Notice D'utilisation

DGC-HD
1

Control sections and connections

1
1
Shock absorbers (2x)
2
Guide rail (2x)
3
Lubrication hole for bearing guide (4x)
4
Thread and centring hole for mounting the
effective load (12x)
5
Slide
6
Thread for optional switch lug (on both
sides, 2x)
Fig. 1
2

Function and application

When the compressed air ports are pressurised alternately, the internal slide moves backwards and
forwards in the cylinder barrel. By means of a rigid connection, the slide 5 also moves. The slot in the
cylinder barrel required for this is covered by a band system. The slide is bearing mounted. The refer-
ence position of the slide can be detected using proximity sensors in the slots aJ.
18
2 3 4
aA aJ
5 6
9
7
Supply ports
8
Surface for profile mounting
9
Slot for slot nut mounting and accessories
(on both sides)
aJ
Groove for proximity switch (on both sides)
aA
Supply ports with plug screws
Festo – DGC-HD – 1304NH English
7
8