Transport And Storage - Festo DGC-8/12 Notice D'utilisation

DGC-8/12
2 Method of operation and use
When the compressed air is ports are pressur-
ized alternately, the piston moves backwards
and forwards in the tubing.
By means of a rigid connection, the outer
slide also moves. The slot in the cylinder bar-
rel required for this is spanned by a band
system.
The DGC-8/12 has been desigined for the
space-saving transport of masses.
It is approved of for operation in slide mode
and yoke mode (observe loading limits).
3

Transport and storage

Take into account the weight of the
S
DGC-8/12. Depending on the design the
DGC-8/12 can weigh over 4 kg.
Please note
S Avoid touching the guides with the
hands during transport und storage.
Otherwise the layer of grease will be
damaged.
18
Fig. 2: Slide mode
Fig. 3: Yoke mode
Fig. 4
Festo DGC-8/12 0212NH English