Names And Functions Of Parts (Display) - Esoteric Grandioso K1 Mode D'emploi

Names and functions of parts (display)

a
Disc type
This shows the type of disc that is currently loaded .
SACD: Super Audio CD
CD: Audio CD
b
Information
During Super Audio CD playback
No indicator:
The two-channel area of a Super Audio CD is selected .
MULTI D-MIX:
This appears when the multichannel audio of a Super Audio
CD is being downmixed and output .
DSD DIRECT:
This appears when the two-channel area of a Super Audio CD
is selected and the DSDF (DSD filter) setting is OFF .
During CD playback and COAX, OPT or USB input
No indicator:
The upconversion function is not in use .
DSD DIRECT:
If DSDF (DSD filter) is set to OFF, this appears when a DSD
signal is input .
UPCONV 2Fs:
The upconverter circuit will upconvert the signal to 64, 88 . 2
or 96 kHz before digital to analog conversion .
UPCONV 4Fs:
The upconverter circuit will upconvert the signal to 128, 176 . 4
or 192 kHz before digital to analog conversion .
UPCONV 8Fs:
The upconverter circuit will upconvert the signal to 256, 352 . 8
or 384 kHz before digital to analog conversion .
UPCONV DSD:
The upconverter circuit will convert the PCM signal to a DSD
signal before digital to analog conversion .
a b c
SACD
MULTI D-MIX 1
1 0 : 2 9
r T
g
c
Repeat indicator
This appears during repeat playback (page 19) .
d
Clock mode
This shows the clock mode (page 25) .
e
Input clock frequency
The clock synchronization signal frequency input through the
CLOCK SYNC IN connector is abbreviated when shown .
For example, a 44 . 1 kHz frequency is shown as "44" .
f
Analog output setting
This shows the analog output (AOUT) setting (ESLA, XLR2, XLR3
or RCA) .
Nothing appears when set to OFF .
g
Message display area
The playback time and various messages appear here .
d e f
CLK 4 4 ESL A
No indicator: Clock sync off
CLK: Set to SYNC
MCK: Set to MCK22M or MCK10M
15