Cleaning And Maintenance - Beurer MP 64 Mode D'emploi

When filing, always move from the outside of the nail towards the tip!
Check the results regularly during the treatment. Stop treatment as soon as
it becomes unpleasant.

7. Cleaning and maintenance

Always unplug the mains part from the socket before cleaning the device.
– Clean the device with a slightly damp cloth. If it is very dirty, you can also
moisten the cloth with a mild soapy solution.
– For hygiene reasons, you may use alcohol and a cloth or brush to clean
the attachments if required. Please dry carefully afterwards.
– Do not drop the device.
– Please make sure that no water enters the device. If this should happen,
only reuse the device once it has fully dried out.
– Do not use any chemical or abrasive cleaning agents.
– Never immerse the device or mains adapter in water or other liquids.
8 – Flame-Shape Cutter
Suitable for removing ingrowing nails.
9 – Nail Cutter
Suitable for exposing ingrown nails and removing
dead nail parts. When using this attachment, use
at a low speed.
10 – Round Sapphire Cutter
Suitable for removing corns. Take care to remove
the corn slowly, layer by layer to prevent damage
to the healthy skin beneath.
11 – Protective Nail Dust Cap
Captures nail dust as you file to minimise inhala-
tion and clean up time.
26