SilverCrest SAB 160 B2 Mode D'emploi page 148

Deleting the caller lists and telephone book entries
GB
Audio streaming (A2DP)
AVRCP (audio video remote control profi le)
144
♦ Turn the multi-controller
♦ Press the BD/ENT button
READING. Subsequently, PB01 appears and the name and call number of
the fi rst memory slot is shown.
♦ Turn the multi-controller to select additional telephone book entries.
♦ Press the button
♦ Press the button
♦ Press and hold the
connection will be disconnected and all directory entries and
®
Bluetooth
call lists on the device are deleted.
The device uses the A2DP profi le (Advanced Audio Distribution Profi le) and can
play back audio data from your mobile phone.
♦ Select an audio fi le from your mobile phone and start the playback.
The entry A2DP appears on the device display and the audio data will be played
back via the speakers connected to the device.
NOTE
► On the mobile phone it may also be necessary to switch to playback via
the Bluetooth stereo headset. Consult the operating manual of your
®
mobile phone for more information.
► With a few mobile phones, the device does not automatically switch to the
A2DP mode. In this case, you can switch to the A2DP mode by pressing
the MD/LD button
appears on the display.
The device uses the AVRCP profi le which makes it easier to control audio devices.
♦ You can use the 1/PAU button
back of the audio fi les on the mobile phone.
♦ You can use the ▸▸I
or next audio fi le on the mobile phone.
to select the display PH BOOK.
3
on the device. The display
15
to dial the selected call number.
2
to end the call and exit the directory function.
17
button until RESET appears on the display. The
several times until the notice BT MUSIC or A2DP
5
on the device to pause or restart play-
14
or I◂◂ buttons on the device to access the previous
2 17
will show
6
SAB 160 B2