Measuring With 2 Points Mode - Nikon Forestry Pro II Manuel D'utilisation

„ Measuring with 2 points mode
„
Before starting the measurement, set the measurement display mode to "2 points mode". See page 21
for more information.
1. Press the PWR button to turn on the power.
• When the laser rangefinder is on standby,
2. Aim at the first point of the target, and then press the PWR button
to measure.
• The measurement result of the first point is displayed as
shown on the right.
• stops flashing and
3. Aim at the 2nd point of the target, and then press the PWR
button to measure.
• stops flashing and the measurement result is displayed.
See page 20 for more information on the display content.
flashes in the internal display.
starts flashing.
Internal display External display
En
Fr
23