Changing The External Display Backlight Level (F3) - Nikon Forestry Pro II Manuel D'utilisation

„ Changing the external display backlight level (F3)
„
Adjust the brightness of the external display. The factory default
En
setting is 3 (High). You can change the backlight level from 0 (off )
Fr
to 3 (high).
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
3. Press the MODE button twice.
• You can now change the external display backlight level.
4. The setting switches every time you press the PWR button.
Internal display
External display
• If you press and hold the MODE button or do not operate the buttons for about 30 seconds, the
displayed setting is saved and the Laser Rangefinder returns to standby. If you do not operate the
buttons for about another 30 seconds, the Laser Rangefinder turns off.
• The setting is saved even when the Laser Rangefinder is turned OFF.
14
F3 IL: [ 3 High ] F3 IL: [ 0 O ]
Internal display
F3 IL: [ 1 Low ] F3 IL: [ 2 Mid ]
External display