Enabling Or Disabling The Log Function (F4) - Nikon Forestry Pro II Manuel D'utilisation

„ Enabling or disabling the log function (F4)
„
You can enable or disable the measurement log function. The factory default setting is On.
• If the measurement is successful, the log number is displayed
on the external display. The number corresponds to the number
in the log list (page 16).
• A maximum of 250 logs can be saved. When the log indicator
on both the internal and external display blinks (page 10),
new logs cannot be saved. Delete logs using F6 (page 17).
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
3. Press the MODE button three times.
• You can now change the setting.
4. The setting switches every time you press the PWR button.
Internal display
External display
F4 Log: [ On ]
• If you press and hold the MODE button or do not operate the buttons for about 30 seconds, the
displayed setting is saved and the Laser Rangefinder returns to standby. If you do not operate the
buttons for about another 30 seconds, the Laser Rangefinder turns off.
• The setting is saved even when the Laser Rangefinder is turned OFF.
N/A
F4 Log: [ O ]
Internal display External display
En
Fr
15