Troubleshooting - arjo AtmosAir Série Mode D'emploi

Troubleshooting

EN
It is recommended that all sections of this manual be reviewed before troubleshooting any
AtmosAir Fit MRS or AtmosAir Plus MRS.
Do not attempt troubleshooting outside this manual or where the remedy recommends to
contact an Arjo service representative. Any unauthorized service, modification, alteration
or misuse may lead to serious injury and / or product damage and will void all applicable
warranties.
SYMPTOM
Mattress cover too wrinkled
upon removal from shipping
container
10
POSSIBLE CAUSE
Internal components have not
acclimated to environment.
or function.
Tubing not connected properly.
Tubing kinked.
Tubing disconnected.
Holes in or damage
to SAT system.
SOLUTION
Apply weight to mattress to
open valves.
Let mattress acclimate for 24
hours. If problem continues,
contact Arjo for assistance.
Check tubing inside mattress
for loose connectors.
Check tubing inside mattress
for kinks.
Check tubing inside mattress
for possible disconnect.
Check SAT system for holes
or damage or contact Arjo
for assistance.