Mattress Installation; Installing Side Bolsters - arjo AtmosAir Série Mode D'emploi

Mattress Installation

EN
1. Position mattress on bed frame with logo facing up and product information tags
at foot end of bed.
2. Ensure mattress is properly positioned with no gaps between mattress and bed frame
or side rails.
Always use a standard bariatric health care bed frame with safeguards or
protocols that may be appropriate. Frame and side rails must be properly
sized relative to the mattress to help minimize any gaps that might entrap
a patient's head or body.

Installing Side Bolsters

After expanding the bariatric bed, add the bolsters using the following procedure:
1. Place the bolster in the gap between the side rails and the mattress with the zippers
to the outside and the marked foot end at the foot end of the bed.
2. Connect the four female buckles on the underside of the left and right side bolsters
to the four male buckles on the underside of the mattress.
Zip flap on mattress
Side Bolster.
3. Zip the mattress to the mattress inserts.
6
AtmosAir
of the bed. Same applies to the right side bolster.
to side bolster.
When bolsters are not in use, tuck bolster sleeves under mattress.
Connect buckles
in four places.