Troubleshooting - Leica RANGEMASTER CRF 1600-B Notice D'utilisation

TrOuBleShOOTing

problem
The image is
not circular when viewing.
Display not focused
When measuring the range, the
display shows „ "
- - -
Display flashes or no measurement
is possible
cause
a) The viewer's pupil is not located in
the eyepiece exit pupil.
b) The position of the eyepiece cup
does not match that for correct
use with and without glasses.
Diopter compensation not exact.
a) Above or below measuring range
b) Object is not sufficiently reflective
Battery dead
41
remedy
a) Correct the eye position.
b) Correct the adjustment: If wearing
glasses, push down the eyepiece
cup; without glasses, it should
remain raised (see p. 28).
Repeat diopter compensation
(see p. 28)
Refer to measuring range
specifications (see p. 32)
Replace battery (see p. 26)