Displaying And Checking The Set Ballistic Parameters - Leica RANGEMASTER CRF 1600-B Notice D'utilisation

displaying and checking the set
ballistic parameters
If you want to check your settings, you can display the
values at any time.
To do this, briefly press the secondary button twice.
• Below the reticule (or instead of the range), the following
will appear in turn for around 2s each:
- the set ballistic curve (see p. 34)
- the set zeroing range (see p. 35)
- the set ballistic output value (see p. 36)
When all ballistic functions are deactivated (
only the setting is displayed.
OFF
bALL = OFF ),
39