Impact Point Correction Using Elevation Adjustment; Displaying And Checking The Set Ballistic Parameters - Leica RANGEMASTER 2700-B Notice D'utilisation

IMPACT POINT CORRECTION USING ELE-
VATION ADJUSTMENT
Variations in the point of impact can be compensated
by adjusting the reticle on your riflescope accordingly.
Based on the bullet trajectory and the zeroin distance,
the Leica Rangemaster can show you the required
adjustment, i.e. the relevant number of clicks. For
different elevations, you can specify whether the click
levels will be
– based on the international standard MOA (min-
utes of angle) graduation, or
– displayed in 5 or 10 millimeter increments.
(Click/MoA adjustment)
Displaying and checking the set ballistic
parameters
If you want to check your settings, you can display the
values at any time.
Press the secondary button
• Below the reticule (instead of the range, if this was
previously displayed), the following will appear in
turn for around 2 s each:
– the set ballistic curve
– the set zeroing distance
– the set ballistic output value
Note:
When all ballistic functions are deactivated
OFF), only the setting is displayed.
OFF
1
briefly 2x.
(bALL =
EN
53