Distance Measurement - Leica RANGEMASTER 2700-B Notice D'utilisation

EN

DISTANCE MEASUREMENT

To measure the distance to an object, you must aim
directly at it. To do this, proceed as follows:
Press the main button 2.
1.
This switches on the device.
• The reticule appears.
When you release the main button, the reticule remains
lit for around another 6
the reticule remains lit continuously.
44
9 8
seconds. If you hold it down,
2. Aim at the object while the reticule is lit.
3. Press the main button again.
a. The reticule disappears briefl y during the mea-
surement.
b. The measured value is displayed.
As long as the reticule remains lit, you can carry out
another measurement at any time by pressing the main
button again.
appears, if
- - -
– the distance to the object is less than 10
or
– the range is exceeded, or
– the object is not suffi ciently refl ective.
When the display disappears, the Leica Rangemaster
shuts down automatically.
yards,