Setting The Zeroing Range - Leica RANGEMASTER CRF 1600-B Notice D'utilisation

4. Press the main button several times to select the
relevant ballistic curve, i.e.
- EU1 to EU12 or
- to , or
US1 US12
if you want the range to be displayed without the impact
point correction ( AbC ) (see p. 36).
- .
OFF
5. Save your setting by briefly pressing the secondary
button.
• The saved setting is lit continuously for 4s as
confirmation, then the display changes first to the
zeroing range setting (
If a ballistic curve is set, after each range measurement
the range value is first displayed for 2s, then the
calculated correction value for 6s.
) and then disappears
SId

SeTTing The zerOing range (

Start with step 1 if you have not previously opened the
menu control, or with step 3 if you have just specified the
ballistic curve and
Sld
1. Press and hold the secondary button (1) (≥3s).
• The display shows
2. Press the secondary button briefly (<2s) twice.
• The display changes to
3. Press the main button (2) several times to select the
required zeroing range.
[m],
- 100
- 200 [m], or
- [m], or
GEE
- [y], or
100
- 200 [y], or
- 300 [y].
4. Save your setting by briefly pressing the secondary
button.
• The saved setting is lit continuously for 4s as
confirmation, then the display changes first to
and then disappears.
35
)
SId
is still flashing in the display.
.
USEU
bALL and then to SId.
AbC