Basic Information On Menu Control; Setting The Unit Of Measure - Leica CRF 1000-R Notice D'utilisation

BaSic infOrmaTiOn On menu cOnTrOl

The main menu is made up of the Meters / Yards (
and Equivalent horizontal range options (
of the individual functions can be found in the relevant
sections.
Both the main menu and the setting options are set up as
a continuous loop - i.e. all items/settings will be displayed
over and over as you continue pressing the button.

SeTTing The uniT Of meaSure

The Leica Rangemaster CRF 1000-R can be set to metric
( ) or imperial units of measure (
EU
)
USEU
). Details
EHr
).
US
23
Settings
1. Press and hold the secondary button (1) (≥3s).
• The display shows
USEU
2. Press the main button (2) to select the desired unit of
measure. = for display in
US
meters
note:
The current setting can always be seen in the display - if
metric values are selected, a dot appears to the bottom
right of the reticule.
3. Save your setting by briefly pressing the secondary
button.
• The saved setting is initially lit continuously as
confirmation, then the display switches to the next
item in the menu (
EHr
further settings have been made.
(flashing)
yardsEU = for display in
) and then disappears if no